Smoothwall Speedplate vs Standard Speedplate. Smoothwall explained
When this speed plate is inserted in the manhole frame, it's in this position. When you go to pull, it goes to that position, and that causes it to expand laterally and grab the frame so you can pull it from the road.
Once you've installed the speed plate in the manhole frame, you're going to want to pull back the T handle for the retaining pin and spin the wheel tight by hand. And then you want to tighten it very tightly. It's important that this speed plate is very tight.
Related Articles
The XL Speedplate
When your customer’s in the field, we don't know what manholes they're going to encounter. Sometimes they might encounter a very large manhole frame, like for Verizon or an electrical manhole, a
Rentals & What to Ask Customers
If you're talking to a customer about a rental unit and you're asking them what they're going to need, you need to make sure and ask them if they've looked at the manhole frames. Have they taken the l
Accounting for different manhole types
As a salesperson for Mr. Manhole you may have a customer that says, I just want the standard speed plate. I don't want anything else. And that's fine. But when your customer has the road shut down, he
Smoothwall Rollpin
You'll notice these roll pins that are in the ends of each side of the speed plate, and their function is to keep the speed plate together. So you always want to make sure they're there and in good sh
Comments