Can I operate the Mr. Manhole tools on a piece of equipment other than a Skidloader?

Was this article helpful? Vote!
No votes
It is possible to use the Mr. Manhole cutters on equipment other than a Skid loader. The line of site for operators is best on a Skidloader. A backhoe, excavator or even an end loader will operate the Mr. Manhole tools.

Related Articles

The XL Speedplate

When your customer’s in the field, we don't know what manholes they're going to encounter. Sometimes they might encounter a very large manhole frame, like for Verizon or an electrical manhole, a

Rentals & What to Ask Customers

If you're talking to a customer about a rental unit and you're asking them what they're going to need, you need to make sure and ask them if they've looked at the manhole frames. Have they taken the l

Accounting for different manhole types

As a salesperson for Mr. Manhole you may have a customer that says, I just want the standard speed plate. I don't want anything else. And that's fine. But when your customer has the road shut down, he

Smoothwall Rollpin

You'll notice these roll pins that are in the ends of each side of the speed plate, and their function is to keep the speed plate together. So you always want to make sure they're there and in good sh

Comments