Why is it important to keep the cutter level while cutting?

Was this article helpful? Vote!
No votes
It isn't so important that you start cutting level. It is important that whatever orientation you start cutting in remains the same throughout the entire cut. The same way that you can't change orientation with a hole saw on a drill applies to the Mr. Manhole cutter. If you are seeing difficult cutting and badly worn Blades, Teeth and Guideshaft, This could be the culprit.

Related Articles

Round Manhole Repairs vs. Square Manhole Repairs

After a road resurfacing, manhole frames and lids need raised to the new road height. This is accomplished by removing a section of the road around the manhole lid and rebuilding the structure at th

Introducing the Gold Series Six Shooter

Manhole frame adjustment is becoming big business due to a new generation of repair tools developed in the last decade. Engineers are specifying new methods to replace the venerable concrete saw and a

Frost Heave in Colder Climates

Perfect to Remove Manhole Frames in Any Climate The Mr. Manhole tool system is the best method in any climate, to remove manhole frames and the surrounding road surface. The question of frost heave ar

How do you adjust manhole frames/lids?

If you are involved in the maintenance of sewers, it’s a safe bet you will have to remove and adjust or replace manhole frames and lids from time to time. When roads are repaved the elevation chang