Why does the cutter bounce when cutting?

Was this article helpful? Vote!
No votes
The cutter functions much like a masonry hammer drill. If you turn off the hammer action of a drill using a masonry bit it will cut very slowly. You want the cutter to bounce to push the teeth into the road.

Resource Link: https://mrmanhole.com/platinum-six-shooter/

Related Articles

Round Manhole Repairs vs. Square Manhole Repairs

After a road resurfacing, manhole frames and lids need raised to the new road height. This is accomplished by removing a section of the road around the manhole lid and rebuilding the structure at th

View

Introducing the Gold Series Six Shooter

Manhole frame adjustment is becoming big business due to a new generation of repair tools developed in the last decade. Engineers are specifying new methods to replace the venerable concrete saw and a

View

Frost Heave in Colder Climates

Perfect to Remove Manhole Frames in Any Climate The Mr. Manhole tool system is the best method in any climate, to remove manhole frames and the surrounding road surface. The question of frost heave ar

View

How do you adjust manhole frames/lids?

If you are involved in the maintenance of sewers, it’s a safe bet you will have to remove and adjust or replace manhole frames and lids from time to time. When roads are repaved the elevation chang

View

Comments