Is there an advantage to having the Platinum instead of the Gold series or B-52 cutter?

Was this article helpful? Vote!
No votes
The Platinum cutter is heavier resulting in faster cutting. The Platinum cutter cuts larger diameter cuts in it's stock configuration. The Platinum cutter cuts 16" deep in it's stock configuration and 22" deep with extended blades. The Platinum cutter includes the Easy-Drive top for longer motor life.

Product: Gold Series Six Shooter

SKU: A-MM0001

Resource Link: https://mrmanhole.com/product/gold-series-customer-package/
Additional Link: https://mrmanhole.com/compare-our-manhole-cutters/

Related Articles

Does the Mr. Manhole System Meet OSHA Silica Regulations?

The short answer is: yes. The Occupational Safety and Health Administration has issued new standards concerning crystalline silica, which has been known to cause silicosis, respiratory diseases, lung

View

What does the receiver strip do?

The receiver strip is the fixture that is welded to the cutting blades and holds the cutting teeth in place. The receiver strip can be replaced when it wears out, usually after 500 or more cuts.

View

Do I need a Skid loader with an enclosed cab to operate the Mr. Manhole tools?

Yes, It is imperative to have an enclosed operator cab for safety.Resource Link: https://mrmanhole.com/platinum-six-shooter/Additional Link: https://www.youtube.com/watch?v=G5CfEBwJWUw

View

Is it best to use a skid loader on tracks as opposed to one on rubber tires?

A skid loader on tracks will be a more stable platform for the Mr. Manhole tools and will have a larger lift capacity.Resource Link: https://mrmanhole.com/platinum-six-shooter/Additional Link: https:/

View

Comments