Can I cut without using a Speedplate?

Was this article helpful? Vote!
No votes
It is imperative that the cutter have a stable centering system. You must use a Speedplate or the Centering System to stabilize the cutter while cutting.

Resource Link: https://mrmanhole.com/b-52-manhole-cutter/
Additional Link: https://mrmanhole.com/speedplates/

Related Articles

Using the Lifting Magnet

Replacing the Guideshaft Lift Pin

Introducing the Gold Series Six Shooter

Manhole frame adjustment is becoming big business due to a new generation of repair tools developed in the last decade. Engineers are specifying new methods to replace the venerable concrete saw and a

Does the Mr. Manhole System Meet OSHA Silica Regulations?

The short answer is: yes. The Occupational Safety and Health Administration has issued new standards concerning crystalline silica, which has been known to cause silicosis, respiratory diseases, lung

Comments