How long does the hitch pin last?
The hitch pin connects the cutter to the drive motor and it sees a lot of stess as the manhole frame is pulled upward from the road. The pin should be inspected for wear several times a day during use and replaced as needed. typically the hitch pin should last for 25-50 cuts.
Resource Link: https://mrmanhole.com/product/hitch-pin-with-lynch-pin-attached/
Related Articles
Tightening the speedplate in the manhole - unlock, tighten, release all those videos together
Pull out the retaining knob and turn it a quarter of a turn to lock it out. Now take the adjusting wheel and spin it in by hand. You're going to use the wrench now, and you're going to use it in a spe
Intro to adjusting for center in manhole frame
The first stage of adjusting to the center of the main hall frame is to pull these adjusting pins. Following that, you're going to grab here, and then you're going to pick up and move this to the cent
Welcome to the Mr. Manhole Sales Training Video Series
Welcome to the Mr. Manhole Sales Training Video Series. The purpose of these videos are to take our two decades plus of experience to ensure you feel empowered to be efficient with our tools.
Comments