Replacing Receiver Strip
The receiver strip can be easily replaced by following this video instruction. It is a simple matter of cutting the old receiver strip off of the blade and welding a new receiver strip in place.
Related Articles
Replacing Receiver Strip
The receiver strip can be easily replaced by following this video instruction. It is a simple matter of cutting the old receiver strip off of the blade and welding a new receiver strip in place.
What does the receiver strip do?
The receiver strip is the fixture that is welded to the cutting blades and holds the cutting teeth in place. The receiver strip can be replaced when it wears out, usually after 500 or more cuts.
Receiver Strip for Water Valve Blades
Product: Receiver Strip for Water Valve BladesSKU: P-MM0324Resource Link: https://mrmanhole.com/product/receiver-strip-for-water-valve-blades/
Why are there two different reciever strips?
The standard reciever strip has a 52" radius curve built in allowing the teeth to track correctly through the cutting radius. The water blade reciever strip has a 28" radius curve for tighter radius c
Comments