Why are the hanger tabs on the Speedplate adjustable?

Was this article helpful? Vote!
No votes
In some circumstances you will need to adjust the tabs to a wider position as in when a series of lift rings has been added to a manhole frame. The rule of thumb is to keep the opening as small as possible.

Resource Link: https://mrmanhole.com/speedplates/
Additional Link: https://www.youtube.com/watch?v=Lby3n6kD4eQ

Related Articles

The XL Speedplate

When your customer’s in the field, we don't know what manholes they're going to encounter. Sometimes they might encounter a very large manhole frame, like for Verizon or an electrical manhole, a

View

Accounting for different manhole types

As a salesperson for Mr. Manhole you may have a customer that says, I just want the standard speed plate. I don't want anything else. And that's fine. But when your customer has the road shut down, he

View

Smoothwall Rollpin

You'll notice these roll pins that are in the ends of each side of the speed plate, and their function is to keep the speed plate together. So you always want to make sure they're there and in good sh

View

Smoothwall Speedplate Hanger Adjustments

When you're using this speed plate in the field, you're going to find that you're going to have to adjust these hangers to get this gripper pad in the specific orientation that you need it to grip the

View

Comments