Is there an advantage to having the Platinum instead of the Gold series or B-52 cutter?

Was this article helpful? Vote!
No votes
The Platinum cutter is heavier resulting in faster cutting. The Platinum cutter cuts larger diameter cuts in it's stock configuration. The Platinum cutter cuts 16" deep in it's stock configuration and 22" deep with extended blades. The Platinum cutter includes the Easy-Drive top for longer motor life.

Product: Platinum Series Six Shooter

SKU: A-MM0097

Resource Link: https://mrmanhole.com/compare-our-manhole-cutters/

Related Articles

Tightening the speedplate in the manhole - unlock, tighten, release all those videos together

Pull out the retaining knob and turn it a quarter of a turn to lock it out. Now take the adjusting wheel and spin it in by hand. You're going to use the wrench now, and you're going to use it in a spe

Intro to adjusting for center in manhole frame

The first stage of adjusting to the center of the main hall frame is to pull these adjusting pins. Following that, you're going to grab here, and then you're going to pick up and move this to the cent

Using the Lifting Magnet

Replacing the Guideshaft Lift Pin

Comments